xflyer53

I'm looking for some advice on how to remove siezed choke plungers from the carb body. I have 2 34mm carbs that the choke plungers are seized and will not budge. They have been sitting in a chem dip for about 3 hours and still won't budge. Any ideas?

Thanks

__________________

'92 Indy 650
'95 Indy XLT 600, plastic skis, skid plate, cobra windshield, XTRA 10, full Fox package, 1" riser

gbousum

I dont know what chem dip is, but WD 40 or PB blaster has always worked for me. Soak them over night or longer then stick a screwdriver in there and see if they want to move.

XLT Spartan

Yep, small flat head screwdriver and some wd40 should do it... Screwdriver should fit right into the notch on the top of the plunger.


Sent from Snowmobile.com Free App

__________________
_______________________________
Toys:
93 Vmax 600
94 XLT Special
99 XLT Touring
02 XC Sp 600

xflyer53

Thanks guys, I'll give it a shot.

__________________

'92 Indy 650
'95 Indy XLT 600, plastic skis, skid plate, cobra windshield, XTRA 10, full Fox package, 1" riser

ken3296

pb blaster works wonders.

joshkidner

heck yeah it does!

__________________
1987 chasis with 1985 597cc under the hood. Xtra-10, fox shocks, and a whole lotta speed!