**What have you done to your POLARIS today?!?!** - Snowmobile Forum: Your #1 Snowmobile Forum

Trip · 09-27-2012, 07:06 AM

Greased it up, changed the chaincase oil, lubed the nipples. gave it a good check over, started her up and braap'd the throttle a little bit, told her she is a naughty girl and I cant wait to ride her hard.

What did you do to your Polaris today???

white lightning · 09-27-2012, 09:53 AM

Except for change chaincase oil - I did makes sure its clean and full .. Ive did everything PLUS I did cleaned the carbs, and the power valves to make sure all in the works and ready for the season. WL.

Polaris650freak · 09-27-2012, 11:54 AM

I built another drag motor for mine today

Sent from my iPhone using Snowmobile

dhridenh · 09-27-2012, 02:11 PM

gave mine a paint job chain case oil painted and cleaned the exhaust plastic skis bar risers soon to have a new windshield my other one got a new seat cover chain case oil changed getting new carbids and ski skins also did the hyfaxs on it as well need to get tie rod ends

zdw0889 · 09-27-2012, 02:42 PM

Took the skid out and replaced every bearing and greased

Renagade · 09-28-2012, 07:12 AM

starting to part my old 440lc polaris this weekend.
anyone need parts?

ExciterRob · 09-29-2012, 07:43 AM

Quote:

Originally Posted by Renagade

starting to part my old 440lc polaris this weekend.
anyone need parts?

What year is it? I could use a speedo cable and the cable in the transducer, maybe even the speedo if it is the right year.

JheLrey · 09-29-2012, 08:05 AM

Sold the bumper off of it

Renagade · 09-29-2012, 11:42 AM

well thats the problem, it says the prod date
is, 110179, serial # is 630121
numbers on head and crankcase are EC34PL-02.

if you pm me your phone num ill send pics.
but not kidding, its rough.
someone went nutz with arctic cat green paint!!

charlie7447 · 09-29-2012, 02:46 PM

spent 3hrs. going over carbides in track some where loose i'm surprised some did not pull out. checked all nuts and bolts in skid to make sure they are tight. greased all fittings and check bearing in skid , that was a two beer job. was a nice day out , would have been better with a foot of snow. can't wait. i'm ready.

charlie

Trip · 09-30-2012, 04:52 PM

Quote:

Originally Posted by charlie7447

spent 3hrs. going over carbides in track some where loose i'm surprised some did not pull out. checked all nuts and bolts in skid to make sure they are tight. greased all fittings and check bearing in skid , that was a two beer job. was a nice day out , would have been better with a foot of snow. can't wait. i'm ready.

charlie

The snow coming!

no74falcon · 09-30-2012, 05:24 PM

I just got a new to me '91 500 Classic that just needed a little t.l.c. I also have a '94 440 Sport that I'm using for parts. Not sure why there was no brake fluid in the 500 but the spare on the 440 was still nice and firm. Put that one on my 500 and bled out all the old fluid from the entire system and filled and bled until all the fluid coming out the bleeder was nice and clean. Topped of the m/c and it feels nice and firm so that should be out of the way. Looks like the original is saveable so I'll go through it and have a spare.

dhridenh · 09-30-2012, 09:16 PM

i just bot a canopy enclosed 10x20 like shed i will be using over the winter for 99 bucks and the temp is dropping fast 36 this coming week at night ooo man and we got Fremont Grass Drags coming friday saturday and sunday its the largest in the north east if u can come down check it out water cross racing rev x stunts and swap meet witch i cant wait for

Polaris650freak · 09-30-2012, 10:45 PM

Tested my pro stock drag sled yesterday, it pulls like a son of a, should be ready to kick some ass this saturday at the grass drags hopefully

Sent from my DROID RAZR using Snowmobile.com App

Renagade · 10-01-2012, 10:24 AM

Quote:

Originally Posted by ExciterRob

What year is it? I could use a speedo cable and the cable in the transducer, maybe even the speedo if it is the right year.

ill be taking above parts off and sending
them out. thanks rob!!!!!
anyone else???

JD8345RT · 10-01-2012, 01:38 PM

I'm in the process of changing my headlight/guage pod over to a different hood. The old one was smashed into on the right side and was riveted together when I got it. Found an '01 700 hood at Hay Days in good shape. It's the same color, but I'll probably strip the decals and run it blank.

Trip · 10-02-2012, 08:16 AM

Quote:

Originally Posted by Renagade

ill be taking above parts off and sending
them out. thanks rob!!!!!
anyone else???

Would ya mind creating a "For Sale thread?" thanks

Trip · 10-02-2012, 08:18 AM

Quote:

Originally Posted by JD8345RT

I'm in the process of changing my headlight/guage pod over to a different hood. The old one was smashed into on the right side and was riveted together when I got it. Found an '01 700 hood at Hay Days in good shape. It's the same color, but I'll probably strip the decals and run it blank.

Not a bad find!

thinking of ripping the decals of sending it to the autobody and have it painted than it leave it stripped black.

Renagade · 10-02-2012, 08:41 AM

Quote:

Originally Posted by Trip

Would ya mind creating a "For Sale thread?" thanks

sure thing. sorry bud, didnt
mean to jack your thread.

dont know what i was thinking.???

ultrarich · 10-02-2012, 08:42 AM

Redoing a TrailMate for the Grand Kidlettes, repairing cracks etc. Will be towed by the Ultra as soon as we get SNOW!