Originally Posted by lifedefiance
I just bought an 03 Edge 600, and the stitching is coming apart on the seat's seam, I was wondering how to remove the seat so i can have it stitched?
If you look at the underside of the tunnel at the rear of the sled, you will see 2 bolts. Remove those and you will be able to take the seat off.
Also the left cylinder seems to be blowing off a decent amount of oil, what causes that?
Most likely you have a pinhole or tear is that cylinder's exhaust valve bellows.
When you say Wisconsin, you said it all.
'01 Polaris Indy 600 XC SP EDGE XR
Powermadd articulating bar riser with 2" riser block (total rise of 4 1/2")
red Cobra low sno-x windshield
Pure Polaris handguards with Pure Polaris mounts
almond/blue drive clutch spring with 10-60 weights
121" x 15" x .91" track with 96 studs.
Citgo Sea and Snow oil