derrickleejr17

Last season I bought a helmet with a heated visor. Instead of hardwiring to the machine I just ran the wires right to the battery and ran it off that. When I did that I noticed a change in the battery. It is as if the visor hookup is always pulling power from the battery even when the sled is off, and I don't have enough juice to start the sled using the electris start. After I have the sled running for a while and shut it down I can use the electric start but if I leave it overnight it won't go. Which wires should I tap into to hookup the visor? Yellow and brown off the main harness? Or somewhere else. Any help would be greatly appreciated. Thanks

RJ Gleason

There should be a plug in available behind the Tach.

__________________
Old Cat Rider
'93 Wildcat 700EFI
w/ Comet 108 Pro-4 clutch & 01 ZR skid

'90 Wildcat Project in progress.

Trail Boss; Dryden to Summerhill trail.
http://www.dcdrifters.net/
http://twintiersleddin.proboards76.com/index.cgi
http://www.fingerlakesstone.com/new.html

Junior Warden; F&AM Dryden Lodge# 472

derrickleejr17

Thanks for the quick reply RJ. I will have a look.