sledhead1221

i have a 96 Ski-doo grand touring 670 2 up and the bearings in the driveshaft need to be replaced i have a few polaris's and i can get the suspention out of them with my eyes closed but i cant get it out of the ski-doo anyone know how?

__________________
Loud Pipes Save Lifes

stangcruzin

Loosen The Track.undo The 4 Bolts On The Tunnel.remove The Top Set Of Idlers.lift The Rear Up About 4 Feet.push The Suspension Forward Just A Bit Under The Drives.work The Track Over The Rear Idlers.will Come Rite Out.now Remove Speedo Cable And Nut Off Three Bolt Flange.remove Chain And Gears.take Off Snap Ring That Holds Bearing In Bottom Of Chaincase.push Shaft Through,may Have To Work Track Over Drives.remove Bearing And Take Shaft Out.the Rest Is Easy.