locky

On my 03 Z570. When I let off the throttle it stalls. Now heres the stumper. When I adjust the idle screw the idle will not change. It stays at a low idle. Please any help is appreciated. Thanks!!

Ditch hopper

did yah clean the main and idle jet does it only do it when you come of the throttle hard?

__________________
Real men Hijack threads

-1995 zr580- aaen pipe, epi clutch kit, camoplast ripsaw/120studs, 3inch riser, flybars, upgraded foxshocks, weisco pistons, lightly ported, 19tooth top 32thooth bottom soon to come bored carbs, plastic skis, new helix and ramps BRAAAP

-1994 indy trail 500- all stock, great on gas

clodev

I hope you find the problem before this weekend. You get snow or rain tonite we got 1/2 and 1/2 Chris Farley jinxed us with in 10 min or him seeing rain on his radar it started to rain a bit. Really bad slush right now

__________________
Clode Vaillancourt Muskegon Mi

upersleder

ARE YOU SAYING THE IDLE SPEED SCREW OR THE IDLE MIXTURE SCREW? ooops sorry about the caps. it sounds like you may have pilot jets plugged, or you could have gotten some water in your fuel. try some isopropyl first, then you may have to pull the carbs. once you have the carbs set, you should not need to play with them at all.

__________________

Jan. 07 SLED OF THE MONTH WINNER

2006-2007 SLED OF THE SEASON WINNER

wide open till ya see God.....THEN BRAKE!!!

smallengineguy

Idle screws are the large ones you can turn with your fingers. Maybe the sled is just so tired from carting your fat ass around it has to stall to rest..................

__________________
1992 Ski Doo Mach 1 (SC-10/2 suspended) March '07 SF.com Sled of the Month!
1993 Ski Doo Mach Z 780 triple
2001 Ski Doo Mini Z



Evergreen Valley Snowmobile Club Webmaster

If I'm not home, CHECK THE TRAILS!

SnowRida

I know what the problem is. Your missing your oil cap. Replace the oil cap and your back in business!

__________________
SnowRida
Against the wind, let the cowboy's RIDE!

Yamaha V-Max
02 MXZ 600
97 Polaris Indy Trail Touring


Official Sled of the Month Judge

chrisfarley

ARE YOU SAYING I PUT THE HEX ON YOU!!
gave you a hooodooo-vooodooo!!!

mother nature is now--- motherinlaw nature...
i'm sick of her B.S.... i've tried talking to her but she's the one that changed the temp... not me....

i mean really i'm good... but i'm not that freakin good!! just ask my "ball 'n' chain"!!

sorry locky i'm a newb and can't help you out on your problem.... just had to squash the "flame on CF!!"

CHEERS SFers!!

ps.. i'll trying talking to motherinlaw nature but "aunt flow" has been in town for a couple of weeks so she is real temperamental!!!

__________________
"fat guy in a little coat"



"oh lookey, i must have gone on a date, flowers, dinner, movie & top it off with some cheap ass dime store champagne! and who said i can't have my cake and eat it too?? and hell i'm CF i'm eating the whole damn thing! and a CAFELATE'? WHAT R U KIDING ME do i have to drink that with my pinkies up or something!!" you freaks!

http://www.flickr.com/photos/ookxtreme/sets/

Ditch hopper

LMFAO damn chris your always good for a chuckle

__________________
Real men Hijack threads

-1995 zr580- aaen pipe, epi clutch kit, camoplast ripsaw/120studs, 3inch riser, flybars, upgraded foxshocks, weisco pistons, lightly ported, 19tooth top 32thooth bottom soon to come bored carbs, plastic skis, new helix and ramps BRAAAP

-1994 indy trail 500- all stock, great on gas

locky

i
I have cleaned any jets yet. Im doing that this weekend. Im thinking also that it might be that idle jet. It does it no matter how hard or soft you come off the throttle. Also about the water. I have gone through 5 tanks of gas already this season.

As for SEG and SnowRida, shouldnt you two be out playing with each others manboobs???

Bulldog

As for the stall when you let off it could be a kinked throttle cable, if you have slack in the cable it should cut power. Also a wisker on the cable could do the same thing

__________________
2004 Arctic Cat F7
1997 Arctic Cat ZR 580
1972 JD JDX 400
1978 JD Cyclone 340

big bore king

Unplug the carb switches and see if the problem goes away. the magnets in them are known for there failures.

__________________
Anything stock pretty much sucks!

2001 Polaris 600xcsp(sks) 1.5 paddle
2002 Polaris 500xcsp 1.25 paddle
1996 Polaris Ultra SP
2000 Polaris XCR 120
2000 Polaris trail blazer 250.
2001 Yamaha Big Bear 400
2000 Honda TRX 90

locky

Would this cause it to stay idleing the same even when I adjust the idle screw?

clodev

__________________
Clode Vaillancourt Muskegon Mi

SnowRida

Locky,
Did you get the problem fixed?

__________________
SnowRida
Against the wind, let the cowboy's RIDE!

Yamaha V-Max
02 MXZ 600
97 Polaris Indy Trail Touring


Official Sled of the Month Judge

locky

I havent had the chance to work on it the past 2 days. Im going to try and work on it tomorrow. I even had to miss my club ride today because of work. Im conducting an audit at work and it has to be done by the end of Jan.

kccats

Go through the carbs and float level.Also check the plastic bushings at the lever!

locky

The plastic bushing came to mind but I dont see why that would have anything to do with idle screw not making it idle any differently.

smallengineguy

The tgrottle switches won't affect the idle screws not doing anything.

__________________
1992 Ski Doo Mach 1 (SC-10/2 suspended) March '07 SF.com Sled of the Month!
1993 Ski Doo Mach Z 780 triple
2001 Ski Doo Mini Z



Evergreen Valley Snowmobile Club Webmaster

If I'm not home, CHECK THE TRAILS!

locky

I did that this morning and now the sled runs great. Can I leave them unplugged or do I need to get them fixed? Oh by the way I still have that picture you sent me of you, IRS and SEG. You guys are nuts

Attached Thumbnails

 

ITriumph

that looks like IRS, BBK, and Snowrida

__________________
snow and ice imagery
extended forecast for Alanson




And on the eighth day, god created snowmobiles .