mx and sled 41

hey guys my track allignment is off really bad for some reason, happened when i was riding on sunday... how to i adjust it back to normal? do i just loosen the track, and pull it over so its even and then tighten it back up again?

__________________
"slidin rear, back window, so it's an easy reach to where my cooler keeps 'em iced down cold"

truck- 1998 chevy 1500 extended cab 4X4 Z71 package fully loaded 5.7L vortec
sled- 1989 Polaris Indy 500 Special (blue clutch spring) FOR SALE!!!!!
bikes- 2000 Honda 300 Fourtrax 4X4 (winch)
2007 Honda CRF 230
2003 Honda CRF 230

BRPforlife

First off adjust your track tension.

The track is off allignment because one of the back bogies is further forward than the other. If the track is further to the left of the sled you have to tighten the left adjustment screw or loosen the right. Vice versa for the right side. After your adjustment, start the sled and spin the track a few times then check your allignment again comparing the distance between the outer cogs and the sliders. If it still isn't alligned than repeat the steps.

mx and sled 41

thanks man... i kinda thought that was how at first... cause it was off the opposite way just a bit... and i got it even... but i never spun the track and checked it again... could have been why it was so far off now... thanks a lot for the help

__________________
"slidin rear, back window, so it's an easy reach to where my cooler keeps 'em iced down cold"

truck- 1998 chevy 1500 extended cab 4X4 Z71 package fully loaded 5.7L vortec
sled- 1989 Polaris Indy 500 Special (blue clutch spring) FOR SALE!!!!!
bikes- 2000 Honda 300 Fourtrax 4X4 (winch)
2007 Honda CRF 230
2003 Honda CRF 230