http://www.snowmobileforum.com Manufacturer of the very popular Edge, XC, RMK, Trail, and lots of other great sleds. en Fri, 20 Nov 2009 21:44:35 GMT vBulletin 60 http://www.snowmobileforum.com/images/snowmobileforum/misc/rss.jpg http://www.snowmobileforum.com http://www.snowmobileforum.com/polaris-snowmobiles/40665-1984-polaris-ss-440-a.html Fri, 20 Nov 2009 21:16:02 GMT I've got a 84 polaris ss 440 with 1,980 miles, good runner no problems. Just started her up, started up fine, but when i try to give it gas it dies, plugs are good. Any ideas?:cool: ]]> Polaris Snowmobiles polaris84ss440 http://www.snowmobileforum.com/polaris-snowmobiles/40665-1984-polaris-ss-440-a.html http://www.snowmobileforum.com/polaris-snowmobiles/40661-97-xlt-headlights.html Fri, 20 Nov 2009 18:53:22 GMT im having a problem with my wifes sled. its a 97 xlt 600 limited. this thing runs awesome, but the headlights might as well not be there, they are so... im having a problem with my wifes sled. its a 97 xlt 600 limited. this thing runs awesome, but the headlights might as well not be there, they are so dim. besides the voltage regulator, does anyone have any "bright" ideas?!!! i need to get these things working right before we start riding. thanks. ]]> Polaris Snowmobiles polarismikexlt http://www.snowmobileforum.com/polaris-snowmobiles/40661-97-xlt-headlights.html http://www.snowmobileforum.com/polaris-snowmobiles/40660-06-primary-clutch-torque.html Fri, 20 Nov 2009 17:42:57 GMT hey guys i just replaced my stock weights and springs with the epi clutch kit everything went well but i am having a hard time finding the tourqe... hey guys i just replaced my stock weights and springs with the epi clutch kit everything went well but i am having a hard time finding the tourqe specs for the primary clutch it would be great if some one could hepl me out on this one
thanks guys ]]> Polaris Snowmobiles switchback06db http://www.snowmobileforum.com/polaris-snowmobiles/40660-06-primary-clutch-torque.html http://www.snowmobileforum.com/polaris-snowmobiles/40657-02-700-ves-engine-parts-where.html Fri, 20 Nov 2009 17:16:31 GMT Looking to get an 02 700 XCSP w/ 2068 miles...chassis great condition, but engine in boxes,lol. First time rebuilding snowmobile engine, will be... Looking to get an 02 700 XCSP w/ 2068 miles...chassis great condition, but engine in boxes,lol. First time rebuilding snowmobile engine, will be using OEM pistons and most parts if no complete engines out there.

I'll be calling Hildabrand's tomorrow to see what they have, but right now it has an outer crankshaft bearing failure. Crank and case halves good. Toasted bearing, one piston, head and possible jug/cylinder recoating needed. I'll be checking it out on Saturday.

I'm not up to speed on when new sleeves are needed compared to just recoating...any certain depth of damage standard? Both jugs will be done if one toasted...or good set of used one. ]]> Polaris Snowmobiles 5Cent http://www.snowmobileforum.com/polaris-snowmobiles/40657-02-700-ves-engine-parts-where.html http://www.snowmobileforum.com/polaris-snowmobiles/40656-drive-sprocket-removal.html Fri, 20 Nov 2009 15:58:24 GMT Just wondering if anyone knows how to remove the drive sprockets from the shaft on my xlt touring? They look like they need some kind of press or... Just wondering if anyone knows how to remove the drive sprockets from the shaft on my xlt touring? They look like they need some kind of press or something and is there a big difference between the xlt and xlt tour:dunnoing drive sprockets the touring looks like they have a wide hub thanks. ]]> Polaris Snowmobiles triple threat http://www.snowmobileforum.com/polaris-snowmobiles/40656-drive-sprocket-removal.html http://www.snowmobileforum.com/polaris-snowmobiles/40652-92-indy-700-liberty-motor.html Fri, 20 Nov 2009 07:35:52 GMT Ok I have a chance to buy a 92-94 Indy wedge that has. 98 700 liberty motor with a head on it. ( don't know much about them ( what to look for and problems) ). It has a 144" skid and a new 2 " track on it. . The tunnel is a crs I think with a "u" cooler. 6 " bar risers And some " flexi skis". The guy said the chain case has been " droped and rolled ". WhAt ever that means. He is askin $600 for it and I don't know if it is worth it or just keep saving and buy a newer sled. I have a 92 Indy trail deluxe with a 488 fan cooled motor this sled is a crazy modified to lighten it up as much as possible to make it faster.I got $300 total in the sled I just wants go fast and not sink in the powder Any more

is this a good deal. What should I look for when I go look at it How many miles are too much for that motor. Any and all input will be nice


Sorry of all the ? S and wHat not. This is my 2nd season still
learning a ton


Snax ]]> Polaris Snowmobiles snax http://www.snowmobileforum.com/polaris-snowmobiles/40652-92-indy-700-liberty-motor.html http://www.snowmobileforum.com/polaris-snowmobiles/40648-1992-polaris-indy-440-l-c.html Fri, 20 Nov 2009 03:47:42 GMT A friend of mine had this sled sitting out in the weather for at least 12 years. I coned him into trading it to me instead of cash for setting up a... A friend of mine had this sled sitting out in the weather for at least 12 years. I coned him into trading it to me instead of cash for setting up a wireless home network for him,

So I brought it home, before I started it I removed the fuel tank and flushed it out, removed the carbs and air box and thoroughly cleaning them, I also cleaned out the coolant/oil reservoirs.

After putting it all back together and installing new plugs it fired up second pull. It seems hot or cold it will start every time in the first or second pull with full choke. I made a video to post and see if someone wouldn't mind taking a look to give me some suggestions about how to go about cleaning the outside of the engine. I'm also curious what you guys think about how well it appears to be running, and how well you think the carbs are tuned. I synchronized them by pulling the throttle up so the thing in the carbs raised all the way up, put a finger in each carb and slowly lowered the throttle until both "pistons" in the carbs reached my fingers at the exact same time. For the idle screws I just tried to set them back until I had roughly an 1800RPM Idle. I'm not sure how else to adjust the idle screws. There is also a small ammount of air bubbles in the fuel lines, i'm guessing new fuel lines and clamps will fix this, as they are old, and it's missing a few clamps.

Thanks ahead of time if any of you get a moment to respond.

http://www.youtube.com/watch?v=Hufy1mzaErM ]]> Polaris Snowmobiles Sternzy http://www.snowmobileforum.com/polaris-snowmobiles/40648-1992-polaris-indy-440-l-c.html http://www.snowmobileforum.com/polaris-snowmobiles/40647-97-polaris-xlt-600-a.html Fri, 20 Nov 2009 03:39:58 GMT Hey guys, not sure how many of you caught my other thread, but i bailed on the arctic cat jag. Sold my turbo, and now i have more money to spend... Hey guys,

not sure how many of you caught my other thread, but i bailed on the arctic cat jag. Sold my turbo, and now i have more money to spend :)

So i found this 1997 Polaris XLT 600.

136 track runs excellent 2600 miles, could use a seat cover and hood has some cracks.

I tried searching the forum and google for a little info on it, but didnt turn up much. I see the 95-96's seem to have lots of motor problems. Crank bearing or something?

So how are the 97's? Did they work the issues out? Any other concerns on this sled, or is it prettty solid?

Guy said he would let me have it for 800 bucks. Blue book on it in my area is 1500. So seems like a good deal to me for my first sled. Let me know your opinons. Thanks for the help!


Heres the ad picture:

]]> Polaris Snowmobiles SubarusRmyThing http://www.snowmobileforum.com/polaris-snowmobiles/40647-97-polaris-xlt-600-a.html http://www.snowmobileforum.com/polaris-snowmobiles/40643-any-idea-where-i-can-find.html Fri, 20 Nov 2009 02:18:51 GMT I am looking for yellow hood vents for my 01 Polaris Xc SP 600. Image:... I am looking for yellow hood vents for my 01 Polaris Xc SP 600.



Hopfully the imaged worked.. i am looking for this style of yellow hood vents...

Thanks:cool: ]]> Polaris Snowmobiles 01xcsp600ftw http://www.snowmobileforum.com/polaris-snowmobiles/40643-any-idea-where-i-can-find.html http://www.snowmobileforum.com/polaris-snowmobiles/40641-2000-polaris-700-xc-deluxe.html Fri, 20 Nov 2009 01:46:53 GMT Hi, I just picked my first polaris last night and it sounds MEAN! Im really excited about it. I have a couple of questions about it. First, I need a... Hi, I just picked my first polaris last night and it sounds MEAN! Im really excited about it. I have a couple of questions about it. First, I need a low beam light bulb, is there anywhere to order these online? Also the speedometor doesent light up either but does work. The fuel gauge does light up but doesent funtion, stuck on empty. Other than that the sled seems to be flawless. Would having no key cause the fuel gauge to not work? Because the guy lost the key so he just unplugged the ignition and it fires right up first pull. And about where does the clutch grab on these things? Thanks for any replies in advance and sorry about lengthy post!


]]> Polaris Snowmobiles REDSOX2758 http://www.snowmobileforum.com/polaris-snowmobiles/40641-2000-polaris-700-xc-deluxe.html http://www.snowmobileforum.com/polaris-snowmobiles/40632-attn-all-ontario-canada-polaris-guys.html Fri, 20 Nov 2009 00:06:09 GMT I am looking for a 600 or 700 twin motor or damged sled for my 98 xc. Please pm me with what you have. I will look at anything as long as the bottom... I am looking for a 600 or 700 twin motor or damged sled for my 98 xc. Please pm me with what you have. I will look at anything as long as the bottom end is good. All I can find are ones worth $1000 for a motor when the sled is only worth $1500 if that please help a fellow sleder find a motor THANKS ]]> Polaris Snowmobiles phuskey http://www.snowmobileforum.com/polaris-snowmobiles/40632-attn-all-ontario-canada-polaris-guys.html http://www.snowmobileforum.com/polaris-snowmobiles/40608-motor-swap-can-fit.html Thu, 19 Nov 2009 14:38:41 GMT Hey I have a 1998 xc 600 twin sled with a blown motor.(crank) So cant find a twin to replace it. Just wanted to know if a 650 would fit and what... Hey I have a 1998 xc 600 twin sled with a blown motor.(crank) So cant find a twin to replace it. Just wanted to know if a 650 would fit and what might have to be done? ]]> Polaris Snowmobiles phuskey http://www.snowmobileforum.com/polaris-snowmobiles/40608-motor-swap-can-fit.html http://www.snowmobileforum.com/polaris-snowmobiles/40605-indy-wedge-front-trailing-arms-pics.html Thu, 19 Nov 2009 09:03:23 GMT I am lookin for pics and ideas for my 92 Indy wedge Any thing that any one fab up , after market trailing arms. I am look at either building and... I am lookin for pics and ideas for my 92 Indy wedge

Any thing that any one fab up , after
market trailing arms. I am look at either building and set or if I can find a reasonable set to buy


Has anyone have aluminum or seen them made ? I want as light as posible ]]> Polaris Snowmobiles snax http://www.snowmobileforum.com/polaris-snowmobiles/40605-indy-wedge-front-trailing-arms-pics.html http://www.snowmobileforum.com/polaris-snowmobiles/40599-tail-light-lens-removal.html Thu, 19 Nov 2009 04:19:19 GMT I just bought a 2000 Trail Touring from my Dad - he bought it new and it has 1700 miles. Imaculate - but the left tail light must be burned out. It... I just bought a 2000 Trail Touring from my Dad - he bought it new and it has 1700 miles. Imaculate - but the left tail light must be burned out. It looks simple enough - took out the 5 screws holding the lens on, but the lens doesn't want to come off? I don't want to break it. Is there a trick - like do I need to pull it a certain way light some car tail lights?
Thanks
D ]]> Polaris Snowmobiles Gangster http://www.snowmobileforum.com/polaris-snowmobiles/40599-tail-light-lens-removal.html http://www.snowmobileforum.com/polaris-snowmobiles/40591-650-rxl-throttle-body-question.html Thu, 19 Nov 2009 02:26:26 GMT Does anyone know the centerbore spacing on these? Thanks Justin Does anyone know the centerbore spacing on these?

Thanks
Justin ]]> Polaris Snowmobiles sprbxr http://www.snowmobileforum.com/polaris-snowmobiles/40591-650-rxl-throttle-body-question.html