98 Polaris xc 700 Rebuild - Snowmobile Forum: Your #1 Snowmobile Forum
Go Back   Snowmobile Forum: Your #1 Snowmobile Forum > Snowmobile Tech / Mod Center > Engine / Drivetrain

» Sponsors

LinkBack Thread Tools Display Modes
Old 01-02-2010, 11:32 PM   #1 (permalink)
Registered User
Join Date: Jan 2010
Location: cb,co
Posts: 2
98 Polaris xc 700 Rebuild

Need to rebuild this sled I burned down as I can not afford to have a shop do it due to child, mortgage and all other adult responsibilities.

Warning I am kind of a mechanical idiot, but think I can do this.
History: Running the sled at 96 mph for about two minutes riding Canadian with my buddy who was out from Boston (was almost worth the burn down when he could not open his hand from the shape of the grip for 15 seconds combined with the look of horror on his face when we finally stopped). Pulled the head cover, nickel sized hole in the pistons pin hole in the other. Sled sat for two years. I am assuming I should check the bottom end. How should I do this and what should I look for? Also all I saw online for top end rebuild kits was Wiseco $295. Anything cheaper and or better? Hopefully cheaper.

Thanks for any help. I have another version of the same sled that I can strip parts from to put on mine. It burned down also with hole in piston and cylinder scaring. Plan to rob the track 144 and switch out my 121. Risers, I assume I will have to switch the fuel lines also. And pow skis.
dishmon13 is offline   Reply With Quote
Sponsored Links

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Powered by vBadvanced CMPS v3.2.2

All times are GMT -5. The time now is 09:07 PM.

Copyright SnowmobileForum.com

Search Engine Friendly URLs by vBSEO 3.6.0