pick length? - Snowmobile Forum: Your #1 Snowmobile Forum

wornknobby · 02-19-2005, 03:03 PM

i measureed from the cowling to the track (not top of knobby) and the measurement came to about an inch and a 1/2. now i know i cant run 1' 1/2" picks, but what did i do wrong? how do i know what size to run? should i just run picks that rea the same height as my knobbies?

**smallengineguy** · 02-19-2005, 03:25 PM

The picks should be 1/8 inch longer than the track paddles.

600EdgeGuy · 02-19-2005, 07:22 PM

remember that the length is measured using the track thickness. So lug height + track thickness+1/8" will be your target length. Also, don't forget tunnel protection.

sesnopro · 02-20-2005, 12:21 PM

what size is your track height?

wornknobby · 02-20-2005, 04:45 PM

is track height, track thickness? i measured from the outside of the track (next to a knobby) to the part of the cowling where the track goes back into the tunel. it came to 1' 1/2"

sesnopro · 02-21-2005, 11:30 AM

how tall are the lugs? for example 1 in, this is what alot of stock tracks are.