Quote:
Originally posted by Snow Freak
SES preload and sag, on a ttr225? Thats going to be tough..
for a few tips, I wouldnt sit down while hitting the jump because it will throw your weight foward over the handle bars, and speed it up some!!! You will go farther... After this bike i would upgrade to a 125 2 stroke or a 250 4 stroke!
Not bad though!
|
all he has to do it turn the rear spring,
measure frome the rear axel to a point on the rear fenader when the bike is of the ground, then sit on the bike and measure it agian. I dont know about your particular bike but there should only be 2-3 inches of movement when you have it set correctly. on common bike(125/250) the should be 95 110 mm from the swing arm to the fender.
