OK, I have for sale (swallow pride) a Rev based hill climber.
My asking price is $16,000.
Details:
This sled started as a 2004 summit X spring snow check, it was sent to specialty sleds in Edmonton, AB, Canada (look them up) for all the work.
Go ahead and look, nothing left of the 2004 might as well call it a 2007 as that's the oldest part on it.
Features include:
1. 889 triple cylinder/triple pipe built by split second performance, dynoed @ 235 hp
2. racers edge chassis, powder coated black with tunnel to bulk head stiffeners accented red
3. Holtz front and rear suspension with titanium bolts and springs/ rides perfect for a 200lb rider
4. lexan side panel and pod, red/clear with minimal stickers
5. boss seat with custom added color, led tail lite installed
6. all aluminum accessories have been anodized red(weightless color system)
7. all cast parts have been powder coated candy red
8. Race Pac digital gauges have been installed(numerous options inc. memory playback)
9. custom pipes built and installed($5000.00) and ceramic coated
10. specialty sleds screen inserts installed
11. 162" challenger track 3" pitch and 2 1/2" lugs
12. aluminum red rear rollers
13. Simmons skis two tone red/black
14. total frame tear down and red anodized
15. 440 cid motor plate installed, welded all seams solid
16. carbs bored and polished
17. dial a jet installed, easily tune and maintain performance without removing carbs
18. Polaris primary clutch with titanium spring
19. secondary clutch aftermarket and beefed up by specialty sleds
20. custom rear bumper, anodized red
21. black rear flap from ski-doo
22. red anodized foot perches for hill climbing
23. hand warmers/thumb warmer tied to one switch
24. scratchers installed on rails for hard pack/ice riding, work well and no overheating issues
25. helmet light plug on sled, 50 watt. light included
26. custom handle bar/risers and bar hooks
27. rear cooler changed out for more efficient 144 cooler also anodized red
28. left hand "gold finger" throttle control
29. original clear tank, spindles(anodized red), track rails(anodized red)
30. sled bug installed, avalanche beacon, GPS, spare belt included with machine
31. Drop and Roll
32. Fox gas shocks in teh rear (tried the air shocks but hated them) Ti springs
33. 2007 XRS HPG take aparts with Ti springs in the front. Best shock that I have found. Hated the Fox air shocks.
Weight is approximately 420 pounds.
sled has been to mountains 3 times, some spare parts from the build come with sled, total cost of build including machine was $68 000, runs on VP111 race fuel here, and 50/50 VP111/91 octane in mountains, premix fuel @ 50-1 ratio.
email with Q's:
mountaingoat73@gmail.com
