|
Well I got it fixed.
The crank case was full of gas. I pulled out the spark plugs yanked it over for about a minute till no more gas was spitting out then re-installed plugs.
Took a lot of pulling but it finally started and this time it continued to run.
After about 2 minutes at idle the thing was running perfectly so I shut it off and tried a re-start, first pull and away it went. Left it for 3 hours and tried another re-start and once again, 1 pull and off it went. I plan on putting new plugs in but the way it's running now its not really necessary.
I didnt soak the carb, I used the aerosol cleaner and compressed air.
In 20 years of working on old sleds I have never had to soak a Mikuni, maybe Im just lucky??
|
