|
Well I got the main jet swapped out and raised the clip on the jet needle to a leaner position but its still not wanting to go past 4k rpms. Its pretty smoky, and right when the clutch starts to engage the rpms drop slightly and it wont go anywhere. Tried running it for 5-10minutes to get it warm but still the same thing. It wont idle very well at all, but I think I just need to adjust the pilot air jet? I think Im gonna pull the plugs out tomorow and clean them/gap them if I can find the correct clearance. It was sitting for two years so I'm also gonna drain the fuel and put some fresh fuel in. Anything else that could cause it to not get up and go?
|
