|
NO, DONT run it without the belt, you'll over rev it and chance blowing the motor.
The belt helps control the RPM's, besides the drive thats what a clutch is for.
now with that out of the way.
1 - one is for gas feed from the fuel pump (then to tank)
and the other is an overflow for the floats.
2- just make sure you have a square straight end and screw
( most have a threaded tap) or push it in. no wire stripping.
3- if you have the stock exhaust use the cone (but try to get a bigger one at least 4'' round, not one of the small ones,
if you notice a performance differance just go UP 1 size on
the jet.
your lucky you have a Mikuni carb and not one of those Damn
Tillisons.
4 - its alright to run it to check the work you did or up grades, just dont run it too long. even though it has a fan it still needs cold temps to run.
5 - Like I said before, DONT run without a belt
Hope this helps.
Dan
|
