|
SEG, I decided to hold off on pulling the frame apart and installed the chaincase, countershaft, rotor and drive shaft. I then installed the oil tank support. Everything bolted up to the chaincase, but I'm also running a newer axle. This allows me to use the newer chaincase cover. The caliper was next, bolted right up and the rotor had enough play side to side to center between the brake pads. The diameter of the rotor is also right. As far as I can tell everything else should bolt up and not get in the way. Might have to do something with the starting rope...maybe.
I'm going to get some pictures tonight and post them.
__________________
Jim Jessup, Woodstock ON Canada
http://www.vintageski-doo.piczo.com
Too many vintage Ski-Doo's to list!
The fleet...
1989 Ski-Doo Formula Mach 1
1996 Yamaha Vmax-4
1997 Ski-Doo Mach 1
1998 Yamaha Venture
1999 Ski-Doo Formula S
|
