|
I'm not sure if it will bolt up or not. The caliper will bolt to the chaincase no problem, the only thing I could see being a problem is the rotor or the clearance from the oil tank support.
So far I've only gotton the chaincase and handle bars bolted up. I need to move the counter shaft over a bit but that won't be a problem. I won't have time to get the brakes hooked up for a couple weeks because I'm pulling everything back off again to separate the bulkhead from the tunnel.
__________________
Jim Jessup, Woodstock ON Canada
http://www.vintageski-doo.piczo.com
Too many vintage Ski-Doo's to list!
The fleet...
1989 Ski-Doo Formula Mach 1
1996 Yamaha Vmax-4
1997 Ski-Doo Mach 1
1998 Yamaha Venture
1999 Ski-Doo Formula S
|
