Haven't really had too much trouble, but i like tooling around. I guess the hardest part will be remembering how to put it all back together
. Got all the different parts bagged and took lots-o-photos. My shop looks like a parts warehouse...carbs are out, exhaust is off, seat-n-tank, dash, hood, suspension, next i'll pull the water pump and check the seals there. Prob won't get into the engine, depends how quick everything else goes. I've never tried pulling the driveshaft, so i can't really say how much is involved.
RJ has some good ideas and seems quite knowledgeable from help i've gotten or other posts i've read.
Good Luck Fixing
