http://www.snowmobileforum.com
Go Back   Snowmobile Forum: Your #1 Snowmobile Forum

Please Visit our Site Sponsors


» Sponsors
» Our Partners
» Sponsors
Thread: Mach Z 800
View Single Post
Old 04-23-2003, 07:46 PM   #3 (permalink)
Garganos
Registered User
 
Join Date: Apr 2003
Location: Southern CT
Posts: 26
doyle800

Check your choke adjustment. Also you could possibly have a waterpump shaft cavity leaking. I cant remember if the 800 triples have an oil line going to the waterpump shaft. I know on the Rotary Valves and serise 3 twins they bathe the shafts in oil. In some cases this leaks excessive oil into the crankcase. These cavities should not leak any oil into the crankcase because they are sealed. Triples were know to use alot of oil. I personally had a 1999 Mach 1 that nobody wanted to ride behind because it smoked to much. It may just be a charicteristic of this sled. Your plug fouling could just be carb settings & choke adjustment and your oil consumption could be ok.
__________________
Gargano's
Sea-doo, Ski-doo & Arctic Cat
Garganos is offline   Reply With Quote
 
Powered by vBadvanced CMPS v3.0 RC2
Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Copyright SnowmobileForum.com