sbucks

If your removing a sc-7 and installing an sc-10 then the brackets need to move forward. The suspension mount holes need to be 24.75" center to center. Grind off the bracket rivets from the inside so the heads stay in, take a strip of wood or metal approx 2" wide, drill 2 holes 24.75" center to center the same size as the mount bolts put front bolt through tunnel and strip ( strip on the inside of tunnel)swing it up to line up with your loose bracket, insert bolt and clamp bracket to tunnel. Drill new mount holes and rivet in place ( do not use aluminium pop rivets, they will break)Thats it!!You will be amazed at the ride differance!!