|
Near the front of the track there should be 2 leather or ruber straps from the slid rail going up to the upper fixed pivot with a long bolt and nylock nut. Spray the threads with PB Blaster or Liquid wrench then loose the same amount each. this should put more tension on the front of the track and less on the skis, if not put more spring tension on front track shock. You could loosen the tension on the rear shock and the sled would squat more. But if you are doing this just to look kool be carefull, you have no control with the skis in the air, and it's hard to see too
|
